RE: multiple OSPF process

From: Kremer, Gert (Gert.Kremer@kpnqwest.com)
Date: Fri May 25 2001 - 10:16:50 EDT

Next message: David Newman: "RE: [j-nsp] IPSec performance benchmarks for M40 and M160"
Previous message: Manuel: "multiple OSPF process"
Maybe in reply to: Manuel: "multiple OSPF process"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hello Emanuele,

Most of the multiple instances features for routing protocols have been
added in JUNOS 4.4, e.g. they are relatively new.

If you check:

http://www.juniper.net/techpubs/software/junos44/swconfig44-routing/download
/instance-config.pdf
<http://www.juniper.net/techpubs/software/junos44/swconfig44-routing/downloa
d/instance-config.pdf>

You'll find most of the relevant documentation.

Regards,

Gert Kremer

-----Original Message-----
From: Manuel [mailto:emanuele2@italy2000.com]
Sent: Friday, May 25, 2001 17:06
To: juniper-nsp@puck.nether.net
Subject: multiple OSPF process

Cannot see anything on Juniper Docs on how to run multiple OSPF process on
the same Juniper box...
nobody knows how to ?

bye
Emanuele

Next message: David Newman: "RE: [j-nsp] IPSec performance benchmarks for M40 and M160"
Previous message: Manuel: "multiple OSPF process"
Maybe in reply to: Manuel: "multiple OSPF process"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:42 EDT