Hi again,
I think I've had problems with the last mail...
I send you the configuration.
Interface configuration:
at-1/2/1 {
unit 0 {
vci 0.299;
shaping {
cbr 4m;
}
family inet {
filter {
input s;
}
address 10.255.255.2/32 {
destination 10.255.255.1;
}
}
}
}
The sampling configuration:
forwarding-options {
sampling {
input {
family inet {
rate 100;
run-length 2;
}
}
output {
file filename out files 5 size 2m world-readable;
}
}
}
And the results are:
/var/tmp
% more out
# Jun 1 11:30:00
# Dest Src Dest Src Proto TOS Pkt Intf IP
TCP
# addr addr port port len num frag
flags
/var/log
% tail sampled
Jun 1 11:30:00 Re-parsing config on SIGHUP
Jun 1 11:30:00 New dump file /var/tmp/out
Jun 1 11:30:00 send_params_to_pfe: control IPC pipe 0 not set up yet
Jun 1 11:31:41 Re-parsing config on SIGHUP
Jun 1 11:31:41 Re-using dump files: /var/tmp/out
Jun 1 11:31:41 send_params_to_pfe: control IPC pipe 0 not set up yet
%
What's the problem with the "out" file ? Does anyone know what's
happening ?
Thanks in advance.
>From: "Metz, Eduard" <Eduard.Metz@kpnqwest.com>
>To: "'Jorge latorre'" <jlat90@hotmail.com>, juniper-nsp@puck.nether.net
>Subject: RE: Sampling !
>Date: Fri, 1 Jun 2001 08:55:15 +0200
>
>I assume something like this is also included in your config?
>
>[edit forwarding-options]
> sampling {
> input {
> family inet {
> rate number;
> run-length number;
> }
> }
> }
>
> > -----Original Message-----
> > From: Jorge latorre [mailto:jlat90@hotmail.com]
> > Sent: 31 May 2001 22:07
> > To: juniper-nsp@puck.nether.net
> > Subject: Sampling !
> >
> >
> > Hi,
> > I've created some filters with the "then sample accept"
> > command at the
> > end. The results are stored in a file named "out" that is empty.
> > term t1 {
> > from {
> > protocol icmp;
> > }
> > then {
> > sample;
> > accept;
> > }
> > }
> >
> > I've seen:
> > % more /var/log/sampled
> > May 31 12:44:24 Re-parsing config on SIGHUP
> > May 31 12:44:24 Re-using dump files: /var/tmp/out
> > May 31 12:44:24 send_params_to_pfe: control IPC pipe 0
> > not set up yet
> > May 31 12:45:43 Re-parsing config on SIGHUP
> > May 31 12:45:43 Re-using dump files: /var/tmp/out
> > May 31 12:45:43 send_params_to_pfe: control IPC pipe 0
> > not set up yet
> >
> > Does anyone know what i'm missing ?
> > Thanks in advance
> >
> > ______________________________________________________________
> > ___________
> > Get Your Private, Free E-mail from MSN Hotmail at
>http://www.hotmail.com.
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
From jared@puck.neth¢óÅ;et
Received: (from jared@localhost)
by puck.nether.net (8.11.1/8.9.3) id f53KRdV11216
for junipe¢óÅ;p@localhost1/8.9.3) idI
(envelope-from jared)
Resent-Message-Id: <200106032027.f53KRdV11216@puck.¢óÅ;er
REceived: (from slist@localhost)
by puck.nether.net (8.11.1/8.9.3) id f53EolA06158;
Sun, 3 Jun 2001 10:50:47 -0400¢óÅ;nv
Date: Sun, 3 Jun 2001 10:50:47 -0400
X-From_: dave_murphy_1@excite.com Su¢óÅ;n
Received: from someone claiming to be
ewey.excite.com (ewey-rwcmta.excite.com [198.3.99.191])
by puck.¢óÅ;er
for <juniper-nsp@puck.nether.net>; Sun, 3 Jun 2001 10:50:45 -0400
(envelo¢óÅ;ro
Received-Date: Sun, 3 Jun 2001 10:50:45 -0400
Received: from slippery ([199.172.153.106]) by e¢óÅ;ex
(InterMail vM.4.01.02.39 201-229-119-122) with ESMTP
id <20010603145034.HOXP15508.ewey.excite¢óÅ;@s
Sun, 3 Jun 2001 07:50:34 -0700
Message-ID: <19499428.991579834287.JavaMail.imail@slippery>
Old-Date: S¢óÅ;3
From: David Murphy <dave_murphy_1@excite.com>
To: Dave Katz <dkatz@juniper.net>
Subject: Re:¢óÅ;ns
Cc: stuart@mfnx.net, juniper-nsp@puck.nether.net
Mime-Version: 1.0
Content-Type: text/plain; ch¢óÅ;t=
Content-Transfer-Encoding: 7bit
X-Mailer: Excite Inbox
X-Sender-Ip: 202.101.57.70
X-Diagnostic: Not on the accept¢óÅ;t
Resent-From: jared@puck.nether.net
Resent-Date: Sun, 3 Jun 2001 16:27:39 -0400
Resent-To: junip¢óÅ;sp
I have tried to change mtu inter fxp, family inet, and ospf,
only the last method works, and seems all t¢óÅ; a
My Junos ver is 4.3
On Thu, 31 May 2001 08:58:20 -0700 (PDT), Dave Katz wrote:
> You should be chan¢óÅ; t
> protocols. The MTU setting for OSPF is for testing purposes; there's
> ¢óÅ;as
>
> X-JNPR-Received-From: outside
> Date: Thu, 31 M¢óÅ;00
> From: David Murphy <dave_murphy_1@excite.com>
> Cc: juniper-nsp@puck.nether.net
> Mim¢óÅ;rs
> Content-Type: text/plain; charset=us-ascii
> Content-Transfer-Encoding: 7bit
> X-Mailer: Excite Inb¢óÅ;
>
> Hi,
>
> Thanks, the ospf works fine now.
> then how about rip? I can no¢óÅ;nd
>
> Dave
>
> On Thu, 31 May 2001 01:56:45 -0700, Stephen Stuart wrote:
>
¢óÅ;
not,
> > > turn on some tracing and see what O¢óÅ;ha
> >
> > IGMP snooping needs to be configured or disabled if the switch is
> > blocking ¢óÅ;ic
> > detected.
> >
> > Stephen
>
>
>
>
>
> ¢óÅ;__
> Send a cool gift with your E-Card
> http://www.bluemountain.c¢óÅ;if
>
>
>
>
_______________________________________________________
Send a cool gift with your E-Card
http¢óÅ;ww
This archive was generated by hypermail 2b29 : Mon Aug 05 2002 - 10:42:42 EDT