[alcatel-nsp] vrf-export policy

[Dan Snyder]

well since you dont appear to be using SDP... I would enter the
command "configure service vprn # auto-bind ldp" on both nodes...that
should make it work for you...let me know

hth,
dan


On Sun, Jul 27, 2008 at 1:18 PM, Dinesh Bhonsle <dineshbs123 at gmail.com> wrote:
> I am using ldp and lsp lsp from both PE's are up.
>
> On Sat, Jul 26, 2008 at 9:02 PM, Dan Snyder <sliplever at gmail.com> wrote:
>>
>> Do you have sdp setup? Or ldp auto bind?
>>
>>
>>
>> On Jul 26, 2008, at 2:15 PM, "Dinesh Bhonsle" <dineshbs123 at gmail.com>
>> wrote:
>>
>>
>>>
>>>
>>>
>>>> also kind of stuck here..do  u have a sample vprn config. some how  the
>>>> alcatel box is not sending  out its directly connected network and static
>>>> routes in vprn  to remote PE (my policy has static/direct into bgp-vpn).
>>>> 7750 has proper lsp path to remote PE.
>>>> vprn 1
>>>> vrf-export "foo"
>>>>             route-distinguisher 6500:1
>>>>             vrf-target target:1:1
>>>>             interface "to-ce1" create
>>>>                 address 81.5.1.1/24
>>>>                 sap 2/1/1:3 create
>>>>                 exit
>>>>             exit
>>>>             static-route 5.3.1.1/32 next-hop 81.5.1.2
>>>>             no shutdown
>>>> ----------------------------------------------
>>>>
>>>>
>>>>
>>>> On Fri, Jul 25, 2008 at 12:40 PM, Stefano Gridelli <sgridelli at gmail.com>
>>>> wrote:
>>>>>
>>>>> In the version we are running (TiMOS-B-5.0.R5) we have to commit the
>>>>> policy before being able to use it:
>>>>>
>>>>> *A:PE101>config>router>policy-options# begin
>>>>> *A:PE101>config>router>policy-options# policy-statement foo
>>>>> *A:PE101>config>router>policy-options>policy-statement# info
>>>>> ----------------------------------------------
>>>>>                 entry 10
>>>>>                     from
>>>>>                         protocol direct
>>>>>                     exit
>>>>>                     to
>>>>>                         protocol bgp-vpn
>>>>>                     exit
>>>>>                 exit
>>>>> ----------------------------------------------
>>>>> *A:PE101>config>router>policy-options>policy-statement# back
>>>>> *A:PE101>config>router>policy-options# comm
>>>>> commit              community
>>>>> *A:PE101>config>router>policy-options# commit
>>>>> *A:PE101>config>router>policy-options#
>>>>>
>>>>> Bye,
>>>>> Stefano
>>>>>
>>>>>
>>>>> On Fri, Jul 25, 2008 at 3:27 PM, Dinesh Bhonsle <dineshbs123 at gmail.com>
>>>>> wrote:
>>>>>>
>>>>>> Stefano...ALu commits as soon as u configure...there is no seperate
>>>>>> commit command that i ever used...if i am missing some thing please let me
>>>>>> know..
>>>>>>
>>>>>>
>>>>>> On Fri, Jul 25, 2008 at 12:21 PM, Stefano Gridelli
>>>>>> <sgridelli at gmail.com> wrote:
>>>>>>>
>>>>>>> Did you commit the policy?
>>>>>>>
>>>>>>> On Fri, Jul 25, 2008 at 2:57 PM, Dinesh Bhonsle
>>>>>>> <dineshbs123 at gmail.com> wrote:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>> I am trying to export static and direct routers from a vprn into a
>>>>>>>> mp-ibgp config on 7750.
>>>>>>>> But when i try to configure a policy..it thorws error  "policy does
>>>>>>>> not exists" though i have policy configured. Can some one tell how we export
>>>>>>>> direct/static routes from a vprn to  remote PE ?.
>>>>>>>>
>>>>>>>>
>>>>>>>> alu7750>config>router>policy-options# info
>>>>>>>> ----------------------------------------------
>>>>>>>>             policy-statement "foo"
>>>>>>>>                 entry 1
>>>>>>>>                     from
>>>>>>>>                         protocol direct
>>>>>>>>                     exit
>>>>>>>>                     to
>>>>>>>>                         protocol bgp-vpn
>>>>>>>>                     exit
>>>>>>>>                     action accept
>>>>>>>>                     exit
>>>>>>>>                 exit
>>>>>>>>
>>>>>>>> *B:NS072450653>config>service>vprn# info
>>>>>>>> ----------------------------------------------
>>>>>>>>             route-distinguisher 6500:1
>>>>>>>>             vrf-target target:1:1
>>>>>>>>             interface "to-ce1" create
>>>>>>>>                 address 81.5.1.1/24
>>>>>>>>                 sap 2/1/1:3 create
>>>>>>>>                 exit
>>>>>>>>             exit
>>>>>>>>             static-route 5.3.1.1/32 next-hop 81.5.1.2
>>>>>>>>             no shutdown
>>>>>>>> ----------------------------------------------
>>>>>>>> *B:NS072450653>config>service>vprn#
>>>>>>>> *B:NS072450653>config>service>vprn# vrf-export foo     <<<<<<<<<<<<
>>>>>>>> WARNING: CLI Policy "foo" does not exist.
>>>>>>>> *B:NS072450653>config>service>vprn#
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> alcatel-nsp mailing list
>>>>>>>> alcatel-nsp at puck.nether.net
>>>>>>>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>> _______________________________________________
>> alcatel-nsp mailing list
>> alcatel-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>
>