[alcatel-nsp] vrf-export policy

[Dan Snyder]

So did it work?

On Sun, Jul 27, 2008 at 11:47 PM, Dan Snyder <sliplever at gmail.com> wrote:
> well since you dont appear to be using SDP... I would enter the
> command "configure service vprn # auto-bind ldp" on both nodes...that
> should make it work for you...let me know
>
> hth,
> dan
>
>
> On Sun, Jul 27, 2008 at 1:18 PM, Dinesh Bhonsle <dineshbs123 at gmail.com> wrote:
>> I am using ldp and lsp lsp from both PE's are up.
>>
>> On Sat, Jul 26, 2008 at 9:02 PM, Dan Snyder <sliplever at gmail.com> wrote:
>>>
>>> Do you have sdp setup? Or ldp auto bind?
>>>
>>>
>>>
>>> On Jul 26, 2008, at 2:15 PM, "Dinesh Bhonsle" <dineshbs123 at gmail.com>
>>> wrote:
>>>
>>>
>>>>
>>>>
>>>>
>>>>> also kind of stuck here..do  u have a sample vprn config. some how  the
>>>>> alcatel box is not sending  out its directly connected network and static
>>>>> routes in vprn  to remote PE (my policy has static/direct into bgp-vpn).
>>>>> 7750 has proper lsp path to remote PE.
>>>>> vprn 1
>>>>> vrf-export "foo"
>>>>>             route-distinguisher 6500:1
>>>>>             vrf-target target:1:1
>>>>>             interface "to-ce1" create
>>>>>                 address 81.5.1.1/24
>>>>>                 sap 2/1/1:3 create
>>>>>                 exit
>>>>>             exit
>>>>>             static-route 5.3.1.1/32 next-hop 81.5.1.2
>>>>>             no shutdown
>>>>> ----------------------------------------------
>>>>>
>>>>>
>>>>>
>>>>> On Fri, Jul 25, 2008 at 12:40 PM, Stefano Gridelli <sgridelli at gmail.com>
>>>>> wrote:
>>>>>>
>>>>>> In the version we are running (TiMOS-B-5.0.R5) we have to commit the
>>>>>> policy before being able to use it:
>>>>>>
>>>>>> *A:PE101>config>router>policy-options# begin
>>>>>> *A:PE101>config>router>policy-options# policy-statement foo
>>>>>> *A:PE101>config>router>policy-options>policy-statement# info
>>>>>> ----------------------------------------------
>>>>>>                 entry 10
>>>>>>                     from
>>>>>>                         protocol direct
>>>>>>                     exit
>>>>>>                     to
>>>>>>                         protocol bgp-vpn
>>>>>>                     exit
>>>>>>                 exit
>>>>>> ----------------------------------------------
>>>>>> *A:PE101>config>router>policy-options>policy-statement# back
>>>>>> *A:PE101>config>router>policy-options# comm
>>>>>> commit              community
>>>>>> *A:PE101>config>router>policy-options# commit
>>>>>> *A:PE101>config>router>policy-options#
>>>>>>
>>>>>> Bye,
>>>>>> Stefano
>>>>>>
>>>>>>
>>>>>> On Fri, Jul 25, 2008 at 3:27 PM, Dinesh Bhonsle <dineshbs123 at gmail.com>
>>>>>> wrote:
>>>>>>>
>>>>>>> Stefano...ALu commits as soon as u configure...there is no seperate
>>>>>>> commit command that i ever used...if i am missing some thing please let me
>>>>>>> know..
>>>>>>>
>>>>>>>
>>>>>>> On Fri, Jul 25, 2008 at 12:21 PM, Stefano Gridelli
>>>>>>> <sgridelli at gmail.com> wrote:
>>>>>>>>
>>>>>>>> Did you commit the policy?
>>>>>>>>
>>>>>>>> On Fri, Jul 25, 2008 at 2:57 PM, Dinesh Bhonsle
>>>>>>>> <dineshbs123 at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>> I am trying to export static and direct routers from a vprn into a
>>>>>>>>> mp-ibgp config on 7750.
>>>>>>>>> But when i try to configure a policy..it thorws error  "policy does
>>>>>>>>> not exists" though i have policy configured. Can some one tell how we export
>>>>>>>>> direct/static routes from a vprn to  remote PE ?.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> alu7750>config>router>policy-options# info
>>>>>>>>> ----------------------------------------------
>>>>>>>>>             policy-statement "foo"
>>>>>>>>>                 entry 1
>>>>>>>>>                     from
>>>>>>>>>                         protocol direct
>>>>>>>>>                     exit
>>>>>>>>>                     to
>>>>>>>>>                         protocol bgp-vpn
>>>>>>>>>                     exit
>>>>>>>>>                     action accept
>>>>>>>>>                     exit
>>>>>>>>>                 exit
>>>>>>>>>
>>>>>>>>> *B:NS072450653>config>service>vprn# info
>>>>>>>>> ----------------------------------------------
>>>>>>>>>             route-distinguisher 6500:1
>>>>>>>>>             vrf-target target:1:1
>>>>>>>>>             interface "to-ce1" create
>>>>>>>>>                 address 81.5.1.1/24
>>>>>>>>>                 sap 2/1/1:3 create
>>>>>>>>>                 exit
>>>>>>>>>             exit
>>>>>>>>>             static-route 5.3.1.1/32 next-hop 81.5.1.2
>>>>>>>>>             no shutdown
>>>>>>>>> ----------------------------------------------
>>>>>>>>> *B:NS072450653>config>service>vprn#
>>>>>>>>> *B:NS072450653>config>service>vprn# vrf-export foo     <<<<<<<<<<<<
>>>>>>>>> WARNING: CLI Policy "foo" does not exist.
>>>>>>>>> *B:NS072450653>config>service>vprn#
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> alcatel-nsp mailing list
>>>>>>>>> alcatel-nsp at puck.nether.net
>>>>>>>>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>> _______________________________________________
>>> alcatel-nsp mailing list
>>> alcatel-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>>
>>
>