[alcatel-nsp] vrf-export policy
Dinesh Bhonsle
dineshbs123 at gmail.com
Mon Jul 28 13:18:58 EDT 2008
Thankls for the info, the static route is up, i added auto-bind ldp . But
that did not bring the routes to the nbr PE.
vrf-export "foo"
route-distinguisher 6500:1
auto-bind ldp
vrf-target target:1:1
interface "to-ce1" create
address 81.5.1.1/24
sap 2/1/1:3 create
exit
exit
static-route 5.3.1.1/32 next-hop 81.5.1.2
On 7/28/08, Dan Snyder <sliplever at gmail.com> wrote:
>
> So did it work?
>
> On Sun, Jul 27, 2008 at 11:47 PM, Dan Snyder <sliplever at gmail.com> wrote:
> > well since you dont appear to be using SDP... I would enter the
> > command "configure service vprn # auto-bind ldp" on both nodes...that
> > should make it work for you...let me know
> >
> > hth,
> > dan
> >
> >
> > On Sun, Jul 27, 2008 at 1:18 PM, Dinesh Bhonsle <dineshbs123 at gmail.com>
> wrote:
> >> I am using ldp and lsp lsp from both PE's are up.
> >>
> >> On Sat, Jul 26, 2008 at 9:02 PM, Dan Snyder <sliplever at gmail.com>
> wrote:
> >>>
> >>> Do you have sdp setup? Or ldp auto bind?
> >>>
> >>>
> >>>
> >>> On Jul 26, 2008, at 2:15 PM, "Dinesh Bhonsle" <dineshbs123 at gmail.com>
> >>> wrote:
> >>>
> >>>
> >>>>
> >>>>
> >>>>
> >>>>> also kind of stuck here..do u have a sample vprn config. some
> how the
> >>>>> alcatel box is not sending out its directly connected network and
> static
> >>>>> routes in vprn to remote PE (my policy has static/direct into
> bgp-vpn).
> >>>>> 7750 has proper lsp path to remote PE.
> >>>>> vprn 1
> >>>>> vrf-export "foo"
> >>>>> route-distinguisher 6500:1
> >>>>> vrf-target target:1:1
> >>>>> interface "to-ce1" create
> >>>>> address 81.5.1.1/24
> >>>>> sap 2/1/1:3 create
> >>>>> exit
> >>>>> exit
> >>>>> static-route 5.3.1.1/32 next-hop 81.5.1.2
> >>>>> no shutdown
> >>>>> ----------------------------------------------
> >>>>>
> >>>>>
> >>>>>
> >>>>> On Fri, Jul 25, 2008 at 12:40 PM, Stefano Gridelli <
> sgridelli at gmail.com>
> >>>>> wrote:
> >>>>>>
> >>>>>> In the version we are running (TiMOS-B-5.0.R5) we have to commit the
> >>>>>> policy before being able to use it:
> >>>>>>
> >>>>>> *A:PE101>config>router>policy-options# begin
> >>>>>> *A:PE101>config>router>policy-options# policy-statement foo
> >>>>>> *A:PE101>config>router>policy-options>policy-statement# info
> >>>>>> ----------------------------------------------
> >>>>>> entry 10
> >>>>>> from
> >>>>>> protocol direct
> >>>>>> exit
> >>>>>> to
> >>>>>> protocol bgp-vpn
> >>>>>> exit
> >>>>>> exit
> >>>>>> ----------------------------------------------
> >>>>>> *A:PE101>config>router>policy-options>policy-statement# back
> >>>>>> *A:PE101>config>router>policy-options# comm
> >>>>>> commit community
> >>>>>> *A:PE101>config>router>policy-options# commit
> >>>>>> *A:PE101>config>router>policy-options#
> >>>>>>
> >>>>>> Bye,
> >>>>>> Stefano
> >>>>>>
> >>>>>>
> >>>>>> On Fri, Jul 25, 2008 at 3:27 PM, Dinesh Bhonsle <
> dineshbs123 at gmail.com>
> >>>>>> wrote:
> >>>>>>>
> >>>>>>> Stefano...ALu commits as soon as u configure...there is no seperate
> >>>>>>> commit command that i ever used...if i am missing some thing please
> let me
> >>>>>>> know..
> >>>>>>>
> >>>>>>>
> >>>>>>> On Fri, Jul 25, 2008 at 12:21 PM, Stefano Gridelli
> >>>>>>> <sgridelli at gmail.com> wrote:
> >>>>>>>>
> >>>>>>>> Did you commit the policy?
> >>>>>>>>
> >>>>>>>> On Fri, Jul 25, 2008 at 2:57 PM, Dinesh Bhonsle
> >>>>>>>> <dineshbs123 at gmail.com> wrote:
> >>>>>>>>>
> >>>>>>>>> Hi,
> >>>>>>>>> I am trying to export static and direct routers from a vprn into
> a
> >>>>>>>>> mp-ibgp config on 7750.
> >>>>>>>>> But when i try to configure a policy..it thorws error "policy
> does
> >>>>>>>>> not exists" though i have policy configured. Can some one tell
> how we export
> >>>>>>>>> direct/static routes from a vprn to remote PE ?.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> alu7750>config>router>policy-options# info
> >>>>>>>>> ----------------------------------------------
> >>>>>>>>> policy-statement "foo"
> >>>>>>>>> entry 1
> >>>>>>>>> from
> >>>>>>>>> protocol direct
> >>>>>>>>> exit
> >>>>>>>>> to
> >>>>>>>>> protocol bgp-vpn
> >>>>>>>>> exit
> >>>>>>>>> action accept
> >>>>>>>>> exit
> >>>>>>>>> exit
> >>>>>>>>>
> >>>>>>>>> *B:NS072450653>config>service>vprn# info
> >>>>>>>>> ----------------------------------------------
> >>>>>>>>> route-distinguisher 6500:1
> >>>>>>>>> vrf-target target:1:1
> >>>>>>>>> interface "to-ce1" create
> >>>>>>>>> address 81.5.1.1/24
> >>>>>>>>> sap 2/1/1:3 create
> >>>>>>>>> exit
> >>>>>>>>> exit
> >>>>>>>>> static-route 5.3.1.1/32 next-hop 81.5.1.2
> >>>>>>>>> no shutdown
> >>>>>>>>> ----------------------------------------------
> >>>>>>>>> *B:NS072450653>config>service>vprn#
> >>>>>>>>> *B:NS072450653>config>service>vprn# vrf-export foo
> <<<<<<<<<<<<
> >>>>>>>>> WARNING: CLI Policy "foo" does not exist.
> >>>>>>>>> *B:NS072450653>config>service>vprn#
> >>>>>>>>>
> >>>>>>>>> _______________________________________________
> >>>>>>>>> alcatel-nsp mailing list
> >>>>>>>>> alcatel-nsp at puck.nether.net
> >>>>>>>>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>
> >>> _______________________________________________
> >>> alcatel-nsp mailing list
> >>> alcatel-nsp at puck.nether.net
> >>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
> >>
> >>
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/alcatel-nsp/attachments/20080728/a55bea4d/attachment-0001.html>
More information about the alcatel-nsp
mailing list