[alcatel-nsp] Switchport Rate limiting

[Jeffrey Meltzer]

Thanks - I decided to just do on ip int's based on class maps/policy maps
(just like cisco on the 6200's, haven't looked at the 6800 manual yet but
it's definitely different on those)

--
Jeffrey Meltzer
Exobit Networks


> -----Original Message-----
> From: sliplever at gmail.com [mailto:sliplever at gmail.com] On Behalf Of Dan
> Snyder
> Sent: Wednesday, November 05, 2008 5:40 PM
> To: Jeffrey Meltzer
> Cc: alcatel-nsp at puck.nether.net
> Subject: Re: [alcatel-nsp] Switchport Rate limiting
> 
> On a 6850 you cannot rate limit on a per swichport basis.  From what I
> understand there is a single broadcom chip that handles QoS for 24
> ports.  A 24 port switch had one chip and a 48 port switch has two.
> 
> If you know the source IP you can rate-limit on this...the only thing
> is that it will rate-limit all traffic going through the switch with
> that source address.  I have the config for doing this somewhere...I
> will post it if you think that it will help you.
> 
> -Dan
> 
> 
> 
> On Wed, Nov 5, 2008 at 3:48 PM, Jeffrey Meltzer
> <jeffrey at exobitnetworks.com> wrote:
> > Hi,
> >
> > Basic question, googling isn't getting me very far for some reason.
> Anyone
> > have any pointers to switchport rate-limiting on Alcatel,
> specifically 6850
> > and 6212?
> >
> > Thanks,
> >
> > Jeff
> >
> > --
> > Jeffrey Meltzer
> > Exobit Networks
> >
> > _______________________________________________
> > alcatel-nsp mailing list
> > alcatel-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/alcatel-nsp
> >