[alcatel-nsp] IES w/ BGP

[Bryan]

Ah, ok, that's why the only family I noticed was l2-vpn...should have
been a clue but I was thinking ipv4 was default or something. Thanks
Diego!

On Mon, Aug 23, 2010 at 4:37 PM, Garcia Del Rio, Diego (Diego)
<diego.garcia_del_rio at alcatel-lucent.com> wrote:
> Hi Bryan,
>
> Bgp support is there for vpls-ad (auto-discovery), thus the only family supported is this one and not ipv4 or anything else. That's why you were seeing parse errors in the alarms, since the family support was different between peers.
>
> Cheers,
> Diego
>
>
> Diego Garcia del Rio
> Product Management, IPD
> Mountain View,CA
> +1 (415) 439-9420
>
>
> ----- Original Message -----
> From: alcatel-nsp-bounces at puck.nether.net <alcatel-nsp-bounces at puck.nether.net>
> To: alcatel-nsp at puck.nether.net <alcatel-nsp at puck.nether.net>
> Sent: Tue Aug 24 00:29:28 2010
> Subject: Re: [alcatel-nsp] IES w/ BGP
>
> Hey guys, sorry for the alarm. My CE was a 7450 which does not support
> BGP. Even though the commands are there! My mistake :)
>
> On Mon, Aug 23, 2010 at 3:24 PM, Bryan <deadheadblues at gmail.com> wrote:
>> Hello,
>>
>> Is there a special trick to get PE-CE BGP routing to work with IES?
>>
>> Here is the scenario:
>>
>> CE----PE (CE connected to SAP in IES)
>>
>> I set up a BGP peer between PE and CE but it will not establish.
>>
>> The CE gives the following error:
>>
>> 713 2010/08/23 21:06:57.75 UTC MINOR: DEBUG #2001 Base BGP
>> "BGP: STATE
>> Peer 1: 192.168.25.2 - Change State from OPENSENT to IDLE due to PARSE_ERROR
>> "
>>
>> 712 2010/08/23 21:06:57.75 UTC MINOR: DEBUG #2001 Base BGP
>> "BGP: OPEN
>> Peer 1: 192.168.25.2 - Received BGP OPEN: Version 4
>>   AS Num 23: Holdtime 90: BGP_ID 2.2.2.2: Opt Length 0
>> "
>>
>> PE and CE can ping each other. Static routing works fine. Here is my
>> BGP configs.
>>
>> CE:
>>
>> *A:R5>config>router>bgp# info
>> ----------------------------------------------
>>            disable-4byte-asn
>>            router-id 5.5.5.5
>>            group "PE"
>>                peer-as 23
>>                neighbor 192.168.25.2
>>                exit
>>            exit
>> ----------------------------------------------
>>
>> PE:
>>
>> *A:R2>config>router>bgp# info
>> ----------------------------------------------
>>            disable-4byte-asn
>>            group "CE"
>>                local-as 23
>>                peer-as 5
>>                local-address 192.168.25.2
>>                neighbor 192.168.25.5
>>                exit
>>            exit
>>            group "IBGP"
>>                next-hop-self
>>                peer-as 23
>>                neighbor 192.168.23.3
>>                exit
>>            exit
>> ----------------------------------------------
>>
>> CE is in AS 5, PE is in AS23.
>>
>> Thanks,
>>
>> Bryan
>>
>
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>