[alcatel-nsp] alcatel ssr card configs.
Garcia Del Rio, Diego (Diego)
diego.garcia_del_rio at alcatel-lucent.com
Wed Jun 16 17:50:58 EDT 2010
The weird thing is that under chassis-mode a (the default) the iom2 should be up as well. All cards are backwards compatible with regards to chassis mode.
Diego Garcia del Rio
Competitive Analysis, IPD
+1 (415) 439-9420
From: alcatel-nsp-bounces at puck.nether.net <alcatel-nsp-bounces at puck.nether.net>
To: alcatel-nsp at puck.nether.net <alcatel-nsp at puck.nether.net>
Sent: Wed Jun 16 23:16:07 2010
Subject: Re: [alcatel-nsp] alcatel ssr card configs.
Try set it to chassis-mode b.
: This mode corresponds to scaling and feature set associated with iom-20g.
: This mode corresponds to scaling and feature set associated with iom-20g-b.
: This mode corresponds to scaling and feature set associated with iom2-20g.
: This mode corresponds to scaling and feature set associated with iom3-xp.
If the chassis mode is not explicitly provisioned in the configuration file, the chassis will come
up in chassis mode a by default.
2010/6/16 Dinesh <dineshbs123 at gmail.com<mailto:dineshbs123 at gmail.com>>
In alcatel 7750 , i have these 2 card types that needs to be UP.
What should be the chassis mode for the above config to work.
we tries chassis-mode C, in which only iom2-20g works and iom-20g-b fails to come up
with default chassis mode only iom-20g-b works amd iom2-20g fails.
alcatel-nsp mailing list
alcatel-nsp at puck.nether.net<mailto:alcatel-nsp at puck.nether.net>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the alcatel-nsp