[alcatel-nsp] Can sap-egress policy remark dscp on L2 service?

[Bryan]

The default queue is 1 though. I tried a different queue and that
doesn't matter as well. I have found some material that says only
dot1p can be marked on a vpls/vll sap-egress.

On Wed, Jan 26, 2011 at 7:11 PM, Dan Snyder <sliplever at gmail.com> wrote:
> Your forwarding class is not mapped to a queue.
>
> On Wed, Jan 26, 2011 at 9:34 PM, Bryan <deadheadblues at gmail.com> wrote:
>> Suppose I have a sap-egress policy with the following configuration
>>
>> *A:r4>config>qos>sap-egress$ info
>> ----------------------------------------------
>>            queue 1 create
>>            exit
>>            fc af create
>>                dscp af31
>>            exit
>> ----------------------------------------------
>>
>> If I apply this on a VPLS Sap will, it re-mark any traffic received in
>> the AF class (from its network interface) to af31? It doesn't seem to
>> work and I am questioning whether it is valid.
>>
>> Thank you,
>>
>> Bryan
>> _______________________________________________
>> alcatel-nsp mailing list
>> alcatel-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>>
>