[alcatel-nsp] Can sap-egress policy remark dscp on L2 service?

[Bryan]

You can classify you just can't mark. Thank you all for the clarification!

On Thu, Jan 27, 2011 at 7:17 AM, Smith, Anton (Anton)
<anton.smith at alcatel-lucent.com> wrote:
> Ah but that’s different. I am fairly sure you can classify on *ingress* to
> an L2 service, based on L3 headers.
>
>
>
> Regards,
>
> Anton Smith
>
>
>
> Technical Sales, IPD.
>
>
>
> ________________________________
>
> From: alcatel-nsp-bounces at puck.nether.net
> [mailto:alcatel-nsp-bounces at puck.nether.net] On Behalf Of Thedin Guruge
> Sent: den 27 januari 2011 08:44
> To: Garcia Del Rio, Diego (Diego)
> Cc: alcatel-nsp at puck.nether.net
> Subject: Re: [alcatel-nsp] Can sap-egress policy remark dscp on L2 service?
>
>
>
> Inspecting l3 headers on a l2 service isn't the wisest thing to do is it? :)
>
> On Thu, Jan 27, 2011 at 7:53 PM, Garcia Del Rio, Diego (Diego)
> <diego.garcia_del_rio at alcatel-lucent.com> wrote:
>
> Unfortunately, no, L2 services can only mark .1p bits but not dscp.
> Diego Garcia del Rio
> Product Management, IPD
> Mountain View,CA
> +1 (415) 439-9420
>
> ----- Original Message -----
> From: alcatel-nsp-bounces at puck.nether.net
> <alcatel-nsp-bounces at puck.nether.net>
> To: Dan Snyder <sliplever at gmail.com>
> Cc: alcatel-nsp at puck.nether.net <alcatel-nsp at puck.nether.net>
> Sent: Thu Jan 27 06:43:36 2011
> Subject: Re: [alcatel-nsp] Can sap-egress policy remark dscp on L2 service?
>
> The default queue is 1 though. I tried a different queue and that
> doesn't matter as well. I have found some material that says only
> dot1p can be marked on a vpls/vll sap-egress.
>
> On Wed, Jan 26, 2011 at 7:11 PM, Dan Snyder <sliplever at gmail.com> wrote:
>> Your forwarding class is not mapped to a queue.
>>
>> On Wed, Jan 26, 2011 at 9:34 PM, Bryan <deadheadblues at gmail.com> wrote:
>>> Suppose I have a sap-egress policy with the following configuration
>>>
>>> *A:r4>config>qos>sap-egress$ info
>>> ----------------------------------------------
>>>            queue 1 create
>>>            exit
>>>            fc af create
>>>                dscp af31
>>>            exit
>>> ----------------------------------------------
>>>
>>> If I apply this on a VPLS Sap will, it re-mark any traffic received in
>>> the AF class (from its network interface) to af31? It doesn't seem to
>>> work and I am questioning whether it is valid.
>>>
>>> Thank you,
>>>
>>> Bryan
>>> _______________________________________________
>>> alcatel-nsp mailing list
>>> alcatel-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>>>
>>
>
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>
>
>
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>
>