[alcatel-nsp] No 7x50 LDP alarms on SAM
thedin at gmail.com
Thu Jan 27 19:08:44 EST 2011
yeah i checked if alarms are squelched..and they aren't, looking at
debugging logs on elements and interface snooping on SAM indicates that
traps (LDP related) are sent and received. i do have northbound system
configured on SAM which i will be checking out soon to see if SAM forwards
Alarm correlation was another area i was interested at, it's weird that i do
see OSPF alarms correlated i.e with a port down alarms etc. but not LDP.
On Fri, Jan 28, 2011 at 12:22 PM, Mcbride, Kevin M <
Kevin.M.Mcbride at centurylink.com> wrote:
> I would recommend checking 5620SAM to insure the alarm is enabled and not
> In SAM select the Administrative Tab and then Alarm Settings.... Find the
> specific alarm you are looking to receive and insure it isn’t squelched...
> The alarms are listed by: domain.alarm name
> You could also setup a TRAP destination on another system and make sure the
> elements are sending the proper trap(s) back to SAM when you create the
> condition of an alarm-state.....
> On 1/27/11 3:59 PM, "Thedin Guruge" <thedin at gmail.com> wrote:
> Hi All,
> I'm having trouble seeing LDP related alarms on SAM, i've tried generating
> LDP interface down, peer down, session down alarms via 7750 (differen Timos
> versions 5,6,7) and 7450 on version 7. Very intermittently i would see tLDP
> session down alarms but not frequent at all.
> I've looked at alarm correlation but couldn't see any LDP alarms.
> All boxes are configured with interface level and targeted level LDP with
> authentication, therefore i should simply be able see at least ldp interface
> down alarm when an interface is shutdown.
> Any thing specific i need to configure in order to activate these alarms?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the alcatel-nsp