[alcatel-nsp] Low voltage condition causes CPM2 and IOM2 to fail

Dan Snyder sliplever at gmail.com
Wed Jun 26 19:14:01 EDT 2013

We might have just seen this. The cards never boot and have to be replaced?

Отправлено с iPhone

Jun 26, 2013, в 5:10 PM, "Koch, Andrew" <andrew.koch at tdstelecom.com> написал(а):

> We have run into a couple instances where on a -48v DC system, we have had the office voltage drop below 42v.  When this occurs, the CPM2 and IOM2 on our 7750 routers fail to restore when appropriate power levels are restored.  In both instances, multiple components (both CPMs, or multiple IOMs) have simultaneously failed to boot on the chassis. These failed components do not POST.  It appears some type of memory corruption or zeroing occurs.
> Has anyone else seen these troubles?
> Thanks for any thoughts.
> Andy Koch
> TDS Telecom - IP Network Operations
> andrew.koch at tdstelecom.com
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp

More information about the alcatel-nsp mailing list