[alcatel-nsp] Forwarding classes

[Amit Dhamija]

Hi

Same flows are remarked to different dot1p bits by an ingress device which
is placed before 7750SR. So here I need to match dot1p of cir traffic to
one forwarding class and eir dot1p to different FC and put them in one
queue at sap ingress , network ingress and network egress.so do you see any
out of ordering in this case.

I think this is almost equivalent to FC subclasses where system doesn't
allow it to put into different queues due to out of sequencing issue.

Thanks


On Fri, Jun 27, 2014 at 7:12 PM, Amit Dhamija <amiitdhamija at gmail.com>
wrote:

> Hi
>
> I want to know if we attach different FC's to same flows ( High and Low
> FC) and then align both the FC's to a single queue in SAP Ingress and
> Network Egress policy then do we see any out of ordering problem for the
> frames of same flow ??
>
> Also when we say forwarding classes remains intact throughout the box , Is
> it a type of tag which is assigned to the frames so within chasis frames
> will always have same tag and when frames reaches destination MDA they can
> be identified by these FC's/tags??
>
> Please help.
>
> Many Thanks
> Amit Dhamija
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/alcatel-nsp/attachments/20140704/68ff3fe3/attachment.html>