[alcatel-nsp] Strange throughput decrease after implemented LAG

[Craig Publow]

Hi Dejan

Have a look at adapt-qos in the interface guide.  I believe you’ll want
adapt-qos link rather the default of distributed.

Cheers
Craig

On Sun, Apr 19, 2020 at 12:09 PM Dejan Tepic <dejantep at gmail.com> wrote:

> We are running MPLS ring with 2 7750 as BNG and number of 7210 Sx. To meet
> growing capacity we have activated LAG om links closest to both BNG, 2x10G.
> In VPRN service we have subscriber interface with group if and static-host
> and msap for DHCP
> but also number of regular interfaces for some customers with subnets and
> stati saps
>
> In both scenario we are using same ingress/egress qos but hte issue we
> have is that customers with normal vprn interfaces are getting only 50% of
> their service capacity. 30mbit gives 15, 100mbit gives 50 etc.
> Everything worked as expected prior to 2x10G LAG. LAG is over network
> ports and has dynamic cost enabled.
>
> Also we have noticed that managed subscribers are receiving double the
> capacity on upstream. This is not 100% confirmed.
>
> It feels as some setting has to be adjusted but what?
> _______________________________________________
> alcatel-nsp mailing list
> alcatel-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/alcatel-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/alcatel-nsp/attachments/20200419/92925ddc/attachment.htm>