Need Stancor Mod Xformer Specs

[R. L. Blaney]

Hi Ted,
I just looked in my old Stancor catalog, and cannot find that part number.
I have a couple other sources, & will keep looking for you.  RE the
terminals.  I think the 3 terminal side would probably be the Audio side,
plate to plate, B+ centertap.  You are probably right about the 4 terminal
side, if it is infact 2 separate isolated windings.  The screen winding
would probably have higher resistance when measured with an Ohm meter.  If
they are approximately the same resistance, it may be that they are a form
of multi-match.  Will keep looking.
for now, 73 de
Dick, WB8MHE
wb8mhe at bright.net


-----Original Message-----
From: Ted Busky <busky at PORTONE.COM>
To: BOATANCHORS at LISTSERV.TEMPE.GOV <BOATANCHORS at LISTSERV.TEMPE.GOV>
Date: Saturday, December 26, 1998 9:49 PM
Subject: Need Stancor Mod Xformer Specs


>Hi,
>Does anyone have at least general specs on a Stancor T101 9200B
>modulation xformer? Its got 3 terminals on one side and 4 on the other.
>I suspect the 3 are the RF plate and B+. The 4 might actually be 2. One
>for the RF plate, the other for the RF screen.
>Thanks, Ted, N1XLW
>
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>To subscribe: listserv at listserv.tempe.gov
>and in body: subscribe BOATANCHORS yourfirstname yourlastname
>To unsubscribe:  listserv at listserv.tempe.gov
>and in body: signoff BOATANCHORS
>Archives for BOATANCHORS: http://www.tempe.gov/archives
>--- --- --- --- --- --- --- --- --- --- --- --- --- --
>

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --