need capacitors

[Steve Lords]

cheez
  nice web site for capacitors
the web address in the e-mail came across a little scrambled on my
machine,but was able to find the web site.
the voltage of the power supply is 500 vdc @ 200 ma
and it is a choke input type
trying to figure out what size equilzing resistors to use
across each resistor,,about 35k across each cap i think
thanks
steve
wa7isl :)



Cheez Ranch wrote:

> You may need to run a couple of (approximately) 24 mfd 350 V in series.
> What's the actual voltage in the circuitry? Here's a decent cap URL:
>
> http://www.turnstyle.com/nsc/catalog.asp?raster=115E.0xBD2E0D7E0F314E15.2694
> .0.5EF7&cat_id=534
>
> Hope you know how to cut and paste!!!!
> dr
>
> At 05:13 PM 5/24/98 -0600, you wrote:
> >looking for the following electrolytic caps
> >for recaping a globe scout 680
> >2 ea 12 mfd @ 700 vdc
> >checked AES's on line catalog and no luck
> >thanks
> >steve
> >wa7isl :-)
> >
> >--- --- --- --- --- --- --- --- --- --- --- --- --- --
> >To subscribe: listserv at listserv.tempe.gov
> >and in body: subscribe BOATANCHORS yourfirstname yourlastname
> >To unsubscribe:  listserv at listserv.tempe.gov
> >and in body: signoff BOATANCHORS
> >Archives for BOATANCHORS: http://www.tempe.gov/archives
> >--- --- --- --- --- --- --- --- --- --- --- --- --- --
> >
> >

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --