CE 100V - need info on key click mod

[Floyd Sense]

I know there was an article in one of the ham magazines a long time ago
about correcting a key click problem in the 100V, but haven't been able to
identify the issue yet (my mag collection is long gone).  The problem
involves the first mixer, through which the signal passes on 15, 40, 80, but
not 10 and 20.  If you can point me to the right issue, I'd greatly
appreciate it.  Better still, if you could describe the mod to me, I'd be
eternally grateful.

If you operate a 100V on CW, don't have the fix applied, and haven't looked
at your output waveform on a scope, you might want to do that.  Another
quick way to check for the problem is to observe the display on the built-in
scope while keying a series of dots.  If you see anything other than a clean
vertical line (there should be nothing to the right or left of the line),
you ought to look more closely at your output.

Thanks for any assistance.


K8AC
Floyd Sense in Angier, NC

--- --- --- --- --- --- --- --- --- --- --- --- --- --
To subscribe: listserv at listserv.tempe.gov
and in body: subscribe BOATANCHORS yourfirstname yourlastname
To unsubscribe:  listserv at listserv.tempe.gov
and in body: signoff BOATANCHORS
Archives for BOATANCHORS: http://www.tempe.gov/archives
--- --- --- --- --- --- --- --- --- --- --- --- --- --