Drake TR4-C info needed
w8pu at YOUR-NET.COM
Tue Mar 23 06:00:53 EST 1999
If the PTO uses nylon gears they do not need lubed. I have had Drakes
with solder rosin on the gears for some unknown reason. Gums them up!
Take alcohol and an acid brush and clean out the old grease from the
worm gear and ball bearings. Then adjust the tension on the ball
bearings by placing an allen wrench through the hole in the back of the
PTO shield . You can find info on this at Thom's Drake Page ....
Relube the ball bearings and worm gear with grease.
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the Boatanchors