FS: Mics and accessories

[Brian Carling]

For Sale:

Electrovoice Desk Microphone. Model EV-620 Dynamic LO-
Z, noise cancelling
Transmitter Desk Mic. Low impedance, stylish mic
finished in attractive dark beige
with red PTT bar in front of base. Mic is in very good
condition. It will compliment
any transmitter or transceiver very well. Comes with
attached 42" shielded cable.
Will sell for $24.00
= = = = =

Shure 526T Transmitter Desk Microphone with General
Electric logo. Labelled as "GE-MARK V"
Cream colored. Has locking PTT bar. Model 19B209694P3
with 5 foot long cable (5 conductor)
and Molex connector. Very good, working condition. Will
sell for only $20.00
= = = = =

Astatic D-104 microphone. All chrome is good, with
Chrome G stand (amplified), press-to-talk bar. All
Chrome finish with gray hammertone base. Works fine,
looks almost like new.
Will sell for $55.00

= = = = =


Heath Antenna Switch, 5 positions. Standard SO-239
connectors.
Very good operating condition.
Will sell for 27.50
1#

= = = = =

Antenna switch, 2-positions, with standard SO-239
connectors.
Will sell for $10.00
1#

= = = = =

Large transmitting Ceramic Switch Assembly, 5 position
with dual contacts,
good for 2-4 KW easily. Heavy-duty construction, with
glazed ceramic sections
and standoffs etc. Utilizes silver pad contacts over
1/4 inch diameter with
multi-contact silver wipers. Dimensions 2-7/8"  X  2-
7/8"  and is 2" deep.
Shaft is the standard diameter,  1/4" and it extends 5"
long and also includes
a pass-thru bushing/bearing for remote mounting behind
a front panel with
additional support. Also included is a metal flange for
mounting to chassis
from the front of switch, or you can use just the
standard 3/8" round hole
to mount it, or use both for stability. If you want a
beautiful heavy-duty
ceramic bandswitch, this is it! (QTY 1 only) Sell for
$22.00
= = = = =

Transmitting Ceramic Switch Assembly, 4 position -
Heavy-duty construction, with
glazed ceramic sections and standoffs etc. Utilizes
silver pad wiper and contacts
over 1/4 inch diameter with single contact per
position. (Triple wipers!)
Good for 1 to 1.5 KW, perhaps even 2 KW. Dimensions 2-
3/4"  X  2-1/8" and is
1-3/4" deep. Shaft is 1/4" diameter and is 3/8" long.
Excellent RF heavy-duty
switch. If you want a beautiful heavy-duty ceramic
switch, this is a goodie!
Includes original black knob. (QTY 1 only) Will sell
for $12.00
= = = = =

Transmitting Ceramic Switch Assembly, 5 position -
Heavy-duty construction, with
glazed ceramic sections and standoffs etc. Utilizes
silver pad wiper and contacts
over 1/4 inch diameter with single contact per
position. (Triple wipers!)
Good for 1 to 1.5 KW, perhaps even 2 KW. Dimensions 2-
3/4"  X  2-1/8" and is
1-3/4" deep. Shaft is 1/4" diameter and is 4-1/2" long
with a panel bushing.
Excellent RF heavy-duty switch. Includes original black
knob. (QTY 1 only) Will sell for $16.00
= = = = =

Transmitting Ceramic Switch Assembly, 6 position - WW2
surplus in excellent condition.
Heavy-duty construction, with ceramic sections and
rotor. Utilizes silver plated
wiper and contacts with dual wipers. Good for 1 to 1.5
KW, perhaps even 2 KW.
Dimensions 2-1/2"  X  2-1/2" and is 1-1/2" deep. Shaft
is 1/4" diameter and is 3/8" long. Excellent RF heavy-
duty switch. If you need a really nice heavy-duty
ceramic bandswitch,
for a transmitter, amplifier or antenna tuner, it's a
doozie! Includes original black knob.
(QTY 1 only) Will sell for $15.00

SHIPPING ADDITONAL