Arcing Problem with DX-40

[David Hollander]

I have a problem with a DX-40 that  I am trying to get going. When I
turn it on,
their is arcing  taking place on the function switch when in the
tune and the standby position - it does not arc in the AM or CW position

where it works normally and puts out 50 watts.  When you turn to one of
those positions (tune or standby) after turning the unit on, it begins
to
arc across the contacts. I have used De-ox but it did it before the
De-ox
was applied.

I saw this 4 years ago on another DX-40 but don't remember the fix I was

given which worked.

Any suggestions?

Tnx,

Dave N7RK

--
***********************************************************

Please note new e-mail address             n7rk at cox.net

***********************************************************
Dave  N7RK                    http://members.dancris.com/~n7rk
Phoenix, Arizona         *DXCC Honor Roll*    *WAZ#23 - 75 Meter SSB*

            ex-XE2/N7RK, N7RK/ZB2, VK2ERK, ZM0AJN, WB6NRK, WN6IWX

Boatanchor Collector Extraordinaire preferring Hallicrafters, National
and what ever else looks interesting!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html