Tube type CB Cobra Cam 88

[Cary Fries]

Fred:

The juice goes on pins 3 and 6, with a jumper between 7 and 10, and another
jumper between 2 and 8.  I looked this over at least four times in a row,
to be sure I was correct.  The CB is in working order, so I feel confident
that I am right.

PS:  The blank spot between channels 22 and 23 is actually channel 24.  We
had a hoot talking on that channel before the 40 channel units came
out.  Apparently there were a few other units on the market in that era
that had channel 24 installed.  As I recall, it was called 23b.

Good Luck,

CF




At 10:41 PM 10/2/2002 -0700, FRED HOLNAGEL wrote:
>Do any of you guys have knowledge of the 23 channel Cobra Cam 88 BK Mark
>tube type CB? I need the connections for the 115 volt input which is an 11
>pin type as used by Heath. There is jumpering required within the plug.
>Thanks for the help.
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?listATANCHORS
>To post - BOATANCHORS at LISTSERV.TEMPE.GOV
>Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html

********************************************************
               Cary Fries   nowvoyager3_NOSPAM at bis.midco.net
                               Bismarck, ND
********************************************************
ESRD 80, HEMO 84-85, TX 85-95, HEMO 95-99,
CAPD 99-00, TX 12/00-CURRENT
********************************************************
Be an organ donor, sign your donor card today.

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/BOATANCHORS.html