Fw: [BOATANCHORS-TEMPE] if cans removal

[Kees Talen]

I would use a "Stampabilities Heat Gun" to unsolder all the points
simultaneity. They are on sale again at Hobby Lobby for $10. Great
desoldering tool and reflow soldering tool.

73 Kees K5BCQ 

--------- Forwarded message ----------
From: Richard  VanTrease <kc8keg at MEI.NET>
To: BOATANCHORS at LISTSERV.TEMPE.GOV
Date: Mon, 14 Aug 2006 00:33:12 -0400
Subject: [BOATANCHORS-TEMPE] if cans removal
Message-ID: <1366.208.31.143.124.1155529992.squirrel at smail.mei.net>

Hello All, I've been pulling parts from a stereo chassis and I need some
advice. It has several "if" cans that I'ld like to salvage but they are
difficult to remove because of the side tabs that go through the chassis
and twisted to secure them. I'ld like to save the tabs as well if I can.
I've already removed two cans but saving the tabs is more difficult.
Thanks and best regards to all, Richard VT kc8keg

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control -
http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html