[Need some hints
Al Parker
anchor at EC.RR.COM
Thu Jun 8 19:16:53 EDT 2006
Hi Greg,
I like your tip on a rounded head setscrew to smooth out the burrs.
Common problem on SP-600 knobs, where they have a recessed area for the
set screw. People clamp down on the edge, or don't remove the screw
enough, or some such. I guess it was supposed to eliminate the problem,
but seems to make it worse.
tnx, 73,
Al, W8UT
New Bern, NC
BoatAnchors appreciated here
http://www.boatanchors.org
http://www.hammarlund.info
----- Original Message -----
From: "Greg Gore; WA1KBQ" <GARDGORE at AOL.COM>
To: <BOATANCHORS at LISTSERV.TEMPE.GOV>
Sent: Thursday, June 08, 2006 6:24 AM
Subject: Re: [BOATANCHORS-TEMPE] Need some hints for removing stubborn
knobs plus some...
> There are several styles of setscrews used such as slotted, Bristol
(internal
> flutes) or Allen (internal hex). It is a common mistake to try to remove
a <snip>
-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------
Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html
More information about the Boatanchors
mailing list