RA-1000 Broadcast Transmitter For Sale (again)

[Todd, KA1KAQ]

Buyer backed out due to financial issues, so it's available again.
Abbreviated relist below:

Less than 3 weeks until 'the day' now, and my house is under deposit.
Tick tock...

So I'm selling the RA-1000 I went to NC to save in September 2005.
Here is a link to one online, to give you some idea of size and
layout:

http://www.sbe124.org/old_xmtr_rescue/our_old_xmtr.html

You can click on the pictures to enlarge for better detail. The one
I'm selling is at least as clean, certainly with fewer paint spatters.

A bit of info on the beast:

It runs a pair of 833s modulated by a pair of 833s. It was last on the
air in November of 2003 and was used for a special BCB test for the
National Radio Club. The local station (WGAI) was bought out by a
larger company who moved operations out of Elizabeth City and used
the site mainly for its towers. The transmitter sat dormant inside,
protected but unused for over a year before I got it. It comes with
MANY spares including:

 - Sixteen (yep, 16) 833s, mix of brands, most likely all used/pulls
at this point (although the engineer said the set in the transmitter
was recent). That's 4 full sets. The majority look good, a few have
some color.

 - Sixteen 845s, again probably pulls but some are in original RCA
boxes and show no signs of use

 - Numerous other tubes (6- 813s, a number of 807s and many smaller tubes)

 - Solid state sticks to replace the 872s and 866s (2 of each)

 - 2 pcs custom Peter Dahl mod iron, somewhere around $700 or more,
put in shortly before the sale and the transmitter being taken
offline, plus the original iron marked as 'tested good' with date and
original spark gap balls, if you want to restore it to original and
sell the Dahl iron (can be used in Gates rigs also)

 - Spare metering panel w/all meters (the lower one, hides behind the
lower door/shelf)

 - Spare variometer, smaller than the one that was installed, probably
helpful for moving to 160 (in the transmitter, it's motorized)

 - Original manual, schematics, and other documentation, including a
copy of the later RA-1000A manual

 - Other spares that I've forgotten, in boxes with other 'stuff'

Overall, I'd conservatively rate the transmitter as good-very good
overall.  It weighs in somewhere around 2400 pounds, meaning it's not
for those of weak constitution. The good news is, it's disassembled
down to panel size and neatly stored in my garage with packing
blankets protecting the painted panels, so it's not a nightmare to
move (I've already done the hard part of the work). It basically has
two cabinets, an inner cabinet with the components mounted to the
walls, and the outer cabinet with the trim, meters, etc. When it's
assembled, you can stand inside the back and work on it. Along the
lines of the Gates BC-1, but larger.

As far as price, I'm not even going to come close to getting my money
back for this adventure. It took 3 days of travel and work, VT to NC
and back, plus rooms, meals, and the labor of 3 people to save this
thing. It doesn't help that Hurricane Katrina hit after I made the deal,
driving gas over $3/gal. for the trip.Just the verifiable expense are
somewhere around $2.5K, which doesn't include anyone's time. I'm
asking $1500 which is probably the value of the tubes and Dahl iron
alone.

If you're eager for a winter project and always wanted a BC
transmitter, this deal was made for you. I'll even help load it.

~ Todd/'Boomer'  KA1KAQ

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html