RBS-2 receiver, Type CCT-46217-A

[Meir WF2U]

I forgot to mention that the RBS-(*) is otherwise identical to the RBM-(*)
receivers electrically, there are minor cosmetic differences. The RBS-(*)
is a shipboard receiver, the main difference is in the power supply, in
that, that the RBS power supply has an additional push-pull audio
amplifier built into it to boost the audio to a higher level, for the high
ambient noise environment of shipboard use (usually as monitoring
receivers on the bridge). The external audio amp is not necessary for
regular shack use...

73, Meir WF2U
Landrum, SC



> Hi all;
>
>   I just purchased a WWII reciever on EBay and am going to need a
> manual. Anyone have one for a RBS, RBS-1, or RBS-2? Thanks!
>
>   It also appears from the EBay picture (Item #260148864302) that it has
> an 8 pin connector as opposed to a common 9 pin. Anyone have a female
> 8 pin around or know where I can get one? Thanks all! Ed in Aurora, IL
> (630) 892-8870
>
>
> ---------------------------------
> Got a little couch potato?
> Check out fun summer activities for kids.
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS To post -
> BOATANCHORS at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html