please post following

[RAY FRIESS]

Well excuse me for trying to get some information from someone who is "generally" regarded as knowing what he is talking about when it comes to technical issues.
I am NOT "fixated" on the Palomar 300 or on any other type of amplifier.
I used that as an example because I happen to have two of them and they seem to be, from my examination of the schematics, typical or representative of the CB type amps that have been discussed here.
I didn't realize my inquiries would raise such ire.   I'll confine my discussions on this topic with a few people here in this state who are also generally regarded as knowing what they are talking about and are willing to calmly answer my questions.
Ray

  ----- Original Message ----- 
  From: Glen Zook<mailto:gzook at yahoo.com> 
  To: RAY FRIESS<mailto:rayfrijr at msn.com> ; BOATANCHORS at LISTSERV.TEMPE.GOV<mailto:BOATANCHORS at LISTSERV.TEMPE.GOV> 
  Sent: Wednesday, September 19, 2007 6:19 PM
  Subject: Re: please post following


  What is this fixation on the Palomar 300?  I am not
  "looking at" the schematic.  This particular amplifier
  may just be one of the very few "CB" type amplifiers
  that are of a decent design.  Frankly, I do not know!

  However, the vast majority of "CB" type amplifiers are
  deficient in their design.  They often lack input /
  output filtering, a good number of them are not biased
  properly, the tubes are often operated beyond the
  published specifications, etc.


-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html