NC-200 part needed

[Glen Zook]

I need the gear and attached shaft that moves the coil tray on the NC-200.  The gear is 9/16ths inch maximum diameter, 3/16ths inch thick, and has 12 teeth.  The shaft is 1/4th inch in diameter and 3 1/4th inch long.

I believe that the same assembly is used in the NC-2-40C, NC-2-40D, in the NC-100 and variants, as well as in other National receivers that have the moving coil assembly for band changing.

Or, anyone know of a source for just a gear the right size with a 1/4th inch hole?

Over half of the teeth are "stripped" from the NC-200 that I obtained several days ago.  I have the coil tray "out" as well as the assembly that moves the tray.  This is a real "pain in the posterior" to get out!

Glen, K9STH

Website:  http://k9sth.com


      

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html