[ Re: Atomic Clock]

Emil Dular WD4SCZ at AOL.COM
Mon Jul 21 21:10:02 EDT 2008


I have just a plain, industrial looking, white face, black hands, ANALOG 
Atomic clock that only synchronizes the minute hand. The hour can be set for 
any time zone and it has a DST defeat mode. If they made one with the red 
quiet period segments and autoalarm markings on it, it'd be the "perfect" 
radio room clock
http://www.crosse-technology.com/analog-atomic-clocks.html


Emil WD4SCZ


----- Original Message ----- 
From: "Larry McDavid" <lmcdavid at LMCENG.COM>
To: <BOATANCHORS at LISTS.TEMPE.GOV>
Sent: Monday, 21 July, 2008 18:20
Subject: [BOATANCHORS-TEMPE] [ Re: Atomic Clock]


> Actually, your clock syncs to WWVB on 60 KHz, usually once per day in
> the early morning hours.
>
> VERY few of these clocks can be set GMT or zero time zone offset. MFJ
> offers one they say can be set to zero offset but that particular clock
> cannot be set to turn off DST correction, so the clock will not show GMT
> throughout a year.
>
> The only "atomic" clock I have found that can successfully be set to GMT
> is a LaCrosse Technology Model WS-8016U. I have purchased several of
> these and they all correctly display GMT throughout the year.
>
> There may be other clock models that will display GMT. If so, I would
> like to know of them as well.
>
> These clocks were made for the United States and its four time zones. I
> believe such clocks made for Europe have more flexibility but the
> receiver in those is not tuned to 60 KHz for WWVB. I'd be very surprised
> if there is a means to modify the clock you mention to display time
> without a US time zone offset.
>
> Larry
>
>
> rick darwicki wrote:
>> This might not be a boat anchor question, but who better to ask it of 
>> then fellow tinkermen.
>> I have a SkyScan 84061 clock (gift) that syncs to WWV and has a switch on 
>> the back for EST, CST, MST and PST. I want to run it on UST and if I set 
>> it that way, it updates itself to WWV and resets.
>> Nothing on the Web or from the manufacture on cutting 
>> diodes/wires/jumpers. Anyone know of a mod before I open it up and start 
>> poking around?
>
>
> -- 
> Best wishes,
>
> Larry McDavid W6FUB
> Anaheim, CA  (20 miles southeast of Los Angeles, near Disneyland)
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - 
> http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
> To post - BOATANCHORS at LISTS.TEMPE.GOV
> Archives - http://lists.tempe.gov/archives/BOATANCHORS.html
> 

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html




More information about the Boatanchors mailing list