No Dumb Questions?

[Glen Zook]

In like 99% of receivers the rotor of the tuning
capacitor is grounded!  It will probably be the
stator.

Glen, K9STH


--- "David C. Hallam" <dhallam at RAPIDSYS.COM> wrote:

Would like to align an NC-121 receiver.  I've done one
alignment before and made out pretty well considering
my lack of experience.  In that case the directions as
to where to connect the signal generator and VTVM were
 very specific and easy to follow.  In the case of the
NC-121 the instructions for IF alignment include
connecting the high side of the generator directly to
the mixer section of the tuning gang."  Does this mean
the  stator, the rotor or something other?
 
An inspection of the schematic to see how the mixer
section of the tuning capacitor is connected in the
circuit should answer your question.  However, the
rotor is the most likely.









Glen, K9STH

Website:  http://k9sth.com


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/BOATANCHORS.html