Viking Ranger cabinet screws

[Paul Kraemer]

Al
Get some threaded rod at the hardware store, cut to required length and 
double nut one end---use a cap nut if you want fancy.
Problem solved
Paul K0UYA
----- Original Message ----- 
From: "Schichler, Alfred (GE EntSol, Digital Energy)" 
<Alfred.Schichler at GE.COM>
To: <BOATANCHORS at LISTS.TEMPE.GOV>
Sent: Monday, November 17, 2008 10:48 AM
Subject: Viking Ranger cabinet screws


I was wondering if anyone has any of the long screws that go into the
back of the Ranger cabinet to draw in the front panel, or if there is an
easy way to make a couple.
I tried using 2 1/2" screws with a long screwdriver. That worked, but
it's not the best solution. I would rather have something closer to
original.

Thanks,
Al, WA2AS

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - 
http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html 

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html