Viking Ranger cabinet screws

[Rinkie Pollack]

There is someone who advertises in Electric Radio each month who supplies these.  I'm not writing from home, so if you cannot find it, let me know and I'll look it up when I get home.

Ron K2RP
K2RP at ARRL.NET

--- On Mon, 11/17/08, Schichler, Alfred (GE EntSol, Digital Energy) <Alfred.Schichler at GE.COM> wrote:
From: Schichler, Alfred (GE EntSol, Digital Energy) <Alfred.Schichler at GE.COM>
Subject: Viking Ranger cabinet screws
To: BOATANCHORS at LISTS.TEMPE.GOV
Date: Monday, November 17, 2008, 8:48 AM

I was wondering if anyone has any of the long screws that go into the
back of the Ranger cabinet to draw in the front panel, or if there is an
easy way to make a couple.
I tried using 2 1/2" screws with a long screwdriver. That worked, but
it's not the best solution. I would rather have something closer to
original.
 
Thanks,
Al, WA2AS

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html