Viking Ranger cabinet screws

[Schichler, Alfred (GE EntSol, Digital Energy)]

Ok. Thanks for all the replies. I think I will try the threaded rod idea
first, and if that doesn't work the way I want, I'll try ordering from
N6KYR.

Al 

-----Original Message-----
From: Boat Anchor Owners and Collectors List
[mailto:BOATANCHORS at LISTS.TEMPE.GOV] On Behalf Of Garey Barrell
Sent: Monday, November 17, 2008 2:56 PM
To: BOATANCHORS at LISTS.TEMPE.GOV
Subject: Re: Viking Ranger cabinet screws

Al -

Cal, N6KYR offers these.  The last e-mail I have for him is

<catman351 at yahoo.com>

73, Garey - K4OAH
Glen Allen, VA

Drake 2-B, 4-B, C-Line & TR-4/C Service Supplement CDs <www.k4oah.com>



Schichler, Alfred (GE EntSol, Digital Energy) wrote:
> I was wondering if anyone has any of the long screws that go into the 
> back of the Ranger cabinet to draw in the front panel, or if there is 
> an easy way to make a couple.
> I tried using 2 1/2" screws with a long screwdriver. That worked, but 
> it's not the best solution. I would rather have something closer to 
> original.
>  
> Thanks,
> Al, WA2AS
>   
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control -
http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html