Modulation impact when amplifying a DSB signal?

[kd4e]

Have you priced a 7360 lately ... if you can find one?

Here is info about a substitute:
http://members.shaw.ca/pacifictv/cartridg.htm

Here is the spec sheet:
http://tubedata.milbert.com/sheets/093/6/6JH8.pdf

It appears as though it will run on 250v, don't know if it will run at 125v.

I do have a couple of old vibrator supplies that output 325v but really 
want
to do this initial project at 125v.  Perhaps later I can look into 
higher plate
voltage design.

>  http://www.wps.com/archives/tube-datasheets/Datasheets/RCA-RIT-104B/30.JPG
>  http://www.wps.com/archives/tube-datasheets/Datasheets/RCA-RIT-104B/31.JPG
>
>  Here's the 7360 rating, the upper of the two.  It won't do your 5W,
>  but will drive the pants off anything up to 6146 or so. WL -----
>  Original Message ----- From: "Wilson Lamb" <infomet at embarqmail.com>


-- 

Thanks! & 73, doc, KD4E
FS/Swap/Wanted: http://kd4e.com/swapn.html
Free OS : http://www.PuppyLinux.com
Personal: http://kd4e.com
            |_|___|_|
            | | & | |
       /\      {|
      /  \     {|
     /    \    {|
    /   @  \   {|
    |   |~_|~~~~|
    |   -| |    |
============\ # KD4E
Have an http://ultrafidian.com day!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html