[Heathkit] GB> HW-18-2

[Michael Tauson]

On Thu, Nov 26, 2009 at 5:44 AM, Bwana Bob <wb2vuf at gti.net> wrote:
> Also, according to Penson, if you use an HP-23 supply, make sure that the
> low B+ is set to 250 V, not the 300 V setting as used by the HW-100/101 and
> SB-101/102 series.

So I've been told.  I have a Drake AC-3 PS which can do everything
except the high B+.  There it tops out around 600-650 volts.  (I can't
remember the current rating.)  How much of a fuss would the HW-18 (or
a HW-101) raise with such a reduced B+?

Best regards,

Michael, WH7HG
-- 
http://www.nationalmssociety.org/chapters/NTH/index.aspx
http://wh7hg.blogspot.com/
http://kludges-other-blog.blogspot.com
Hiki Nô!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=BOATANCHORS
To post - BOATANCHORS at LISTS.TEMPE.GOV
Archives - http://lists.tempe.gov/archives/BOATANCHORS.html