[Boatanchors] Tool query
johnmb at nc.rr.com
Wed Jul 27 19:51:56 EDT 2011
I bought both sizes and they didn't work worth a darn...
At 06:29 PM 7/27/2011, J. Forster wrote:
>There are special tools for some brands.
>Switchcraft made a thing with a screwdriver handle. The business end was a
>collet with internally serrateed teeth. Problem is, there is a wide
>variety of knurls on the ring nots.
>The wrong knurl and it's worse than useless.
>You might have some luck wiuth soft-jaw MS connector pliers.
> > I'm refurbing a Halli S-40B. There's four toggle switches and an headphone
> > jack that are secured to the front panel by those @#$%^%$ "ring nuts" (if
> > that's what they're called). Trying to get them off/on with pliers always
> > results in them (and perhaps other parts as well) getting buggered up when
> > the pliers slip off, etc. Surely there is a special tool made just for
> > these things. Any of you guys out there know of such and if so, where one
> > can be acquired?
> > Thanks and 73 to all,
> > Bob
> > AG5X
> > _______________________________________________
> > Boatanchors mailing list
> > Boatanchors at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/boatanchors
>Boatanchors mailing list
>Boatanchors at puck.nether.net
More information about the Boatanchors