[Boatanchors] round IF cans - how to remove and open?

[Steve Mulder]

It turns out that the coil assembly was spring loaded into the can. With 
a little bit of "push and twist", the coil assembly jumped out of the 
bottom end of the can. The can remained attached to the chassis.

On 12/23/2012 3:46 PM, Steve Mulder wrote:
> I need to repair one of the IF transformers on a 1947 Motorola 65T21.
> I can't figure out how to remove the cans from the chassis, or how to 
> open them up.