[Boatanchors] Looking for a nylon toothed wheel for Hallicrafters FPM-300 slave bandswitch

[KA9EGW]

Try sdp-si dot com
73 de ka9egw

-----Original Message-----
From: Boatanchors [mailto:boatanchors-bounces at puck.nether.net] On Behalf Of
Mike Langner
Sent: Thursday, August 01, 2013 2:34 PM
To: boatanchors at puck.nether.net
Subject: [Boatanchors] Looking for a nylon toothed wheel for Hallicrafters
FPM-300 slave bandswitch

Hello everyone !

Here's my quest for an unobtainable part.

I'd like to repair/restore a Hallicrafters FPM-300 that came my way.

Apparently when the toothed drive belt that connects the toothed wheel on
the primary bandswitch to the slave bandswitch broke whoever had it before
didn't succeed in getting a replacement belt, so he removed the toothed gear
from the slave bandswitch shaft, drilled a hole in the front panel, slid a
shaft coupling and a knob into the hole he drilled, and changed bands by
turning two knobs - the original bandswitch and the one he "created."

And then he apparently threw away the old toothed gear.

I fear the part is truly unobtainable.

Might anyone know of a "junker" or a parts unit I could purchase in order to
get the little toothed wheel?

Thank, everyone !

Mike/
K5MGR
_________________________________________________

 

Mike Langner
929 Alameda Road NW
Albuquerque, NM 87114-1901



(505) 898-3212 home/home office
(505) 238-8810 cell
mlangner at swcp.com

 

_______________________________________________
Boatanchors mailing list
Boatanchors at puck.nether.net
https://puck.nether.net/mailman/listinfo/boatanchors


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2013.0.3392 / Virus Database: 3209/6542 - Release Date: 08/01/13