[Boatanchors] AM-495/GR needed for parts

Phil Carpenter carpenterpa at tds.net
Sun Aug 18 17:19:25 EDT 2013


I'm looking for some 4D22 tubes if you might have any for a project I'm working on.

Thank you in advance for a reply!

Phillip (W4RTX)

Sent from my iPhone

On Aug 18, 2013, at 1:02 PM, "Fuqua, Bill L" <wlfuqu00 at uky.edu> wrote:

>  I want to reconstruct a project I had done as a kid. 
> I modified an AM-495 to make an HF amplifier which I drove
> by my CE 20A.
>  It does not need to be complete just as long as it is mostly there.
> Panel, box are the most important parts. I have sockets and tuning dials.
> I have power supply. Don't want to ruin a perfectly good one.
>  I have an earlier amplifier used in similar transmitter that has a pair of 
> 4E27A tubes in it that I have no need for. It is intended for 6 meters.
> I also have loads of spare 4E27 tubes as well.
> 73
> Bill wa4lav
> 800 498 7565
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at puck.nether.net
> https://puck.nether.net/mailman/listinfo/boatanchors

More information about the Boatanchors mailing list