[Boatanchors] Mobile/Small HF transmitter with Dual-tube finals?

[qrv at kd4e.com]

I think that other beam power tubes would work as well
e.g. 5763's, 6V6's, even 1Q5's or 3Q5's may be OK ...

http://frank.pocnet.net/sheets/049/1/1Q5GT.pdf

WDYT?

I'm not sure what other tubes would be suitable.

Thanks!

> "Dual Finals" and "not a hernia maker" narrows down the field!
>
> All the 2x 6146 are pretty hefty as you know. Can't think of a dual 807
> factory built job...can anyone else?
>
> John K5MO
>
>
> At 07:00 PM 6/26/2013, qrv at kd4e.com wrote:
>> I'm looking for a transmitter with dual-tube finals.
>>
>> Can y'all recommend a manufacturer & model to look for?
>>
>> I don't think Morrow or Pierson or Elmac made one with
>> dual finals.
>>
>> It needs to be compact, not a big ole hernia-maker as
>> I don't have a lot of spare op desk space.
>>
>> QRP is fine.  At least 80, 40, 20m.
>>
>> AM w/modulator w/push-pull output transformer would make
>> the intended mod easier - scroll down for BC-696 mod
>> http://kd4e.com/pp.html
>>
>> CW is OK - just must have push-pull output amenable to
>> the same sort of mod. as shown in the BC-696.
>>
>> Homebrew would be OK.
>>
>> WDYT?



-- 

Thanks! & 73, KD4E.com

David Colburn - Nevils, Georgia USA

Search with: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22