[Boatanchors] Elmac AF-67 - Is V2 only for NFM?

[qrv at kd4e.com]

Cool, thanks!

The rig is enroute to me but I found a top chassis pic & it seems
the tubes aren actually inside the VFO box - good design Elmac!

Happy New Year!

David

> The tube is a reactance modulator.  If the  power supply runs 6.3-volts
> for the heaters ("filaments"), then you should be able to remove the
> tube.  But, if the power supply runs 12.6-volts for the heaters, the
> tube has to remain or else the series / parallel relationship will cause
> an unbalance in the voltage applied to the tubes.
> Glen, K9STH



-- 

David (NOT Dave) Colburn, KD4E - Nevils, Georgia USA

Safe & Secure Search Engine: duckduckgo.com

Android for Hams: groups.yahoo.com/group/hamdroid
Creative Tech: groups.yahoo.com/group/ham-macguyver
Raspi Alternative: groups.yahoo.com/group/beagleboneblack/

Restored to design-spec at Heaven's gate 1Cor15:22