[Boatanchors] shaft coupling?

[wb3fau55 at neo.rr.com]

hey Mike how about  finding a good machinist and make on e out of a piece of brass round stock?  73 Russ.
---- Michael Tortorella <w2iy at verizon.net> wrote: 
> I posted this a couple weeks ago and I am going to interpret the ensuing
> deafening silence to indicate that the experienced hands were snickering and
> chuckling at the thought of a 3/8" shaft on a Jennings vacuum
> variable....even the rankest newcomer knows the shafts on these are
> 1/2"....have recently joined the ranks of the enlightened (on this topic,
> anyway) so I still need a shaft coupling, only this time I got the size
> right - 1/2" to 1/4".  Plea for one to buy still active.
> 
> On another topic, has anyone heard form Jim W8KGI?  No traffic from him in a
> long time it seems.
> 
> Thanks and 73
> Mike W2IY
> 
> -----Original Message-----
> From: Boatanchors [mailto:boatanchors-bounces at puck.nether.net] On Behalf Of
> Michael Tortorella
> Sent: Thursday, August 21, 2014 11:42 AM
> To: boatanchors at puck.nether.net
> Subject: [Boatanchors] shaft coupling?
> 
> Folks,
> 
>  
> 
> Working with a vacuum variable capacitor, has a 3/8" shaft, so I need a 3/8
> to 1/4 coupling.  Anyone have one out there they would like to sell?
> 
>  
> 
> Thanks and 73 to all
> 
> Mike W2IY
> 
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at puck.nether.net
> https://puck.nether.net/mailman/listinfo/boatanchors
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2014.0.4745 / Virus Database: 4007/8076 - Release Date: 08/21/14
> 
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at puck.nether.net
> https://puck.nether.net/mailman/listinfo/boatanchors