[Boatanchors] Amplifier Parts for Sale

Dave Hollander n7rk at cox.net
Thu Jul 2 12:45:39 EDT 2015


Amplifier Parts for sale.

These are all from a Henry 2K that was parted out. Prefer payment by 
paypal but other methods accepted.

1. 250 pf 4500 volt wide plate spaced variable capacitor - $60 plus 
shipping
This is a plate tuning capacitor from a Henry 2K linear amplifier. This 
capacitor is in excellent condition and ready to install in your 
amplifier or antenna tuner project.
http://n7rk.com/radiostuff9/bigplatecap.jpg
http://n7rk.com/radiostuff9/bigplatecap2.jpg

2. Antenna Chaneover Relay Assembly from Henry 2K - $40 plus shipping
This is the antenna changeover relay assembly from a Henry 2K  amp with 
a bunch of other good parts such as a Millen high voltage connector, 11 
pin chassis connector, RF choke and more.
http://n7rk.com/radiostuff9/2k_relay_etc.jpg
http://n7rk.com/radiostuff9/2k_relay_etc2.jpg
http://n7rk.com/radiostuff9/2k_relay_etc3.jpg

3. Redmond blower from a Henry 2K Amplifier - $30 plus shipping
This has been tested and works  but is slow starting. Probably needs new 
lubrication?
http://n7rk.com/radiostuff9/2kblower.jpg
http://n7rk.com/radiostuff9/2kblower2.jpg

4. Airdux HR-2K Tank Coil Pi-Network Assembly for 80-10 Meters - $35
Pulled from a Henry 2K Linear Amplifier. This will work with a air of 
3-500 or 4-400 Tubes. Good for a homebrew linear amplifier project. 
Includes insulators for mounting to a chassis.
http://n7rk.com/radiostuff9/airduxHR2K.jpg
http://n7rk.com/radiostuff9/airduxHR2K2.jpg

5. Band Input Circuit Assembly from a Henry 2K - $40 plus shipping
This has coils for 80-10 meters and was used with a pair of 3-400 tubes. 
The assembly is in nice shape but the detent on the rotary switch is not 
working.
http://n7rk.com/radiostuff9/2kinputckt.jpg
http://n7rk.com/radiostuff9/2kinputckt2.jpg
http://n7rk.com/radiostuff9/2kinputckt3.jpg

6. Henry 2K Plate and Loading Dials - $22 plus shipping
These are plate and loading dials that go behind the front panel and are 
seen through the windows. They fit a standard 1/4 inch shaft.
http://n7rk.com/radiostuff9/2kdials.jpg
http://n7rk.com/radiostuff9/2kdials2.jpg

Thanks for Looking,

Dave N7RK


More information about the Boatanchors mailing list