[calix-nsp] IPv6 on E5 series

Frank Bulk frnkblk at iname.com
Wed Jan 25 23:09:31 EST 2012


We don't have any E5's otherwise I would test.  Please do share back with
this group!

Frank

-----Original Message-----
From: calix-nsp-bounces at puck.nether.net
[mailto:calix-nsp-bounces at puck.nether.net] On Behalf Of Walter Keen
Sent: Tuesday, January 24, 2012 12:05 PM
To: calix-nsp at puck.nether.net
Subject: [calix-nsp] IPv6 on E5 series

Anyone have experience using IPv6 on E5's?

We're using them almost strictly for layer 2.  E5-111's, aggregated by a 
E5-400 before going to a cisco router.  Cisco router terminates layer 3.

We're using either paepvc (pppoa to pppoe conversion) or dtpvc (and a 
bridged modem instead of ppp), so I think that providing IPv6 over this 
should be simplistic, but wanted to find out if anyone had done it 
before and could share some gotchas if there are any.

If not, we'll be testing in the next month I think, and I'll certainly 
share what we find.
_______________________________________________
calix-nsp mailing list
calix-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/calix-nsp




More information about the calix-nsp mailing list