[calix-nsp] Bridge three separate ONT.

[Larry Smith]

Dan,

  Thanks,  will do some review.

-- 
Larry Smith
lesmith at ecsis.net

On Thu February 14 2019 13:39, you wrote:
> Hi Larry. It looks like your's is the first post on the list in nearly 6
> years. I'd forgotten that I was subscribed.
>
> You may want to review the documentation on TLS, which is the standard
> solution for this type of setup:
>
> https://www.calix.com/content/calix/en/site-prod/library-html/systems-produ
>cts/prem/op/p-gw-op/ae/800-spg/index.htm?toc7190410.htm?95502.htm
>
> And l2cp tunneling may be what you're looking for to resolve complaints
> about layer-2 traffic not passing.
>
> "Calix Community" is more active, and I would suggest posting there as
> well.
>
> On 02/14/19 13:03 -0600, Larry Smith wrote:
> >I am trying to setup an configuration for a customer
> >that entails bridging (as in layer 2) three ONT at different
> >locations.  I have all three 716-E ONT configured and working
> >with the same VLAN assigned.  We can "talk" via IP but simple
> >layer2 does not appear to be working.
> >
> >Any suggestions on what to check.
> >
> >Calix E7-2 box with slot 1 being a GE-24 card.
> >All 3 ONT are 716-E.