[cisco-bba] Cisco 7206 with bus error

Tay Chee Yong tcy at pacific.net.sg
Thu Sep 11 18:33:56 EDT 2003


Hi all,

I am using a Cisco 7206 NPE 200 to terminate PPPoX sessions.

I was configuring the range pvc command, and when i tried to add in the
idle-timeout under the range pvc command, the router rebooted, giving me
the following error message:

router uptime is 3 minutes
System returned to ROM by bus error at PC 0x61DC2D5C, address 0xFFFFFFFF
System restarted at 17:22:49 SGT Thu Sep 11 2003
System image file is "slot0:c7200-ik9s-mz.122-15.T5.bin"

A second attempt to configure the idle-timeout was successful. Following is
the configuration on the router interface.

interface ATM4/0.1 point-to-point
 no ip route-cache
 no ip mroute-cache
 range dsl-1 pvc 1/101 1/240
  encapsulation aal5autoppp Virtual-Template1
  idle-timeout 300
  create on-demand
 !

Any advise would be greatly appreciated.

Regards,
Cheeyong


More information about the cisco-bba mailing list