[cisco-bba] vpdn logging tunnel-drop

[Tassos Chatzithomaoglou]

That's what i'm trying to avoid, because i'm already using radius accounting for 
per-session "logging".

I'm trying to do per-tunnel logging ;-)


adama.faye at bell.ca wrote:

> For this I am using the following commands 
> 
> vpdn logging
> vpdn logging local
> vpdn logging user
> vpdn history failure
> 
> You will receive this kind of logging information when the connection is
> down.
> 
> Mar  3 15:56:22: %VPDN-6-CLOSED: L2TP LNS Ro-C7204 closed  user
> sec_user2 at pnss; Result 2, Error 6  
> 
>            
> You can also have the failure history with the command : 
> 
> Ro-C7204-10#sh vpdn history failure 
>  
> Number of entries in table: 1
> Table size: 20
> User: sec_user2 at pnss, MID = 338
> NAS: bas1, IP address = 10.64.64.1, CLID = 0
> Gateway: Ro-C7204, IP address = 10.64.64.2, CLID = 0
> Log time: Mar  3 16:08:56.045, Error repeat count: 2
> Failure type: The remote server closed this session
> Failure reason: Result 2, Error 6
> 
> 
> Thanks.
> 
> 
> 
> -----Original Message-----
> From: cisco-bba-bounces at puck.nether.net
> [mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of Tassos
> Chatzithomaoglou
> Sent: May 6, 2004 12:21 PM
> To: cisco-bba
> Subject: [cisco-bba] vpdn logging tunnel-drop
> 
> What exactly does "vpdn logging tunnel-drop" log?
> 
> I'm looking for a way to see (sh logging, syslog) when my L2TP tunnels
> drop and the reason 
> of drop.
> 
> 

-- 
***************************************
       Chatzithomaoglou Anastasios
Network Design & Development Department
              FORTHnet S.A.
          <achatz at forthnet.gr>
***************************************