[cisco-bba] hub and spoke -L2TP

[adama.faye at bell.ca]

Unfortunately, this feature is not available on cisco 7200 with 12.3(T).
I verified the command is not here ....


-----Original Message-----
From: Dennis Peng [mailto:dpeng at cisco.com] 
Sent: May 27, 2004 1:53 PM
To: Faye, Adama (P010495)
Cc: cisco-bba at puck.nether.net
Subject: Re: [cisco-bba] hub and spoke -L2TP

There's a feature called Half Duplex VRF's on that may do what you
want:

http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/10kfm/hdpx.ht
m

I think this feature is on all platforms in 12.3(7)T, but I can't seem
to find the docs...

Dennis

adama.faye at bell.ca [adama.faye at bell.ca] wrote:
> Hi all,
> 
> Is there a way to implement hub and spoke (no communication between
> spokes) in L2TP environment, without using filters on the
> virtual-access?
> 
> Thanks.
> 
>  
> 
> 
> 
> 
> 
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba