[cisco-bba] hub and spoke -L2TP

[Dennis Peng]

You tried 12.3(7)T? I verified it was there on my 7200.

Dennis

adama.faye at bell.ca [adama.faye at bell.ca] wrote:
> 
> Unfortunately, this feature is not available on cisco 7200 with 12.3(T).
> I verified the command is not here ....
> 
> 
> -----Original Message-----
> From: Dennis Peng [mailto:dpeng at cisco.com] 
> Sent: May 27, 2004 1:53 PM
> To: Faye, Adama (P010495)
> Cc: cisco-bba at puck.nether.net
> Subject: Re: [cisco-bba] hub and spoke -L2TP
> 
> There's a feature called Half Duplex VRF's on that may do what you
> want:
> 
> http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/10kfm/hdpx.ht
> m
> 
> I think this feature is on all platforms in 12.3(7)T, but I can't seem
> to find the docs...
> 
> Dennis
> 
> adama.faye at bell.ca [adama.faye at bell.ca] wrote:
> > Hi all,
> > 
> > Is there a way to implement hub and spoke (no communication between
> > spokes) in L2TP environment, without using filters on the
> > virtual-access?
> > 
> > Thanks.
> > 
> >  
> > 
> > 
> > 
> > 
> > 
> > _______________________________________________
> > cisco-bba mailing list
> > cisco-bba at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-bba
> 
> 
> _______________________________________________
> cisco-bba mailing list
> cisco-bba at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-bba