[cisco-bba] Radius IP address

[Dib Elie]

Hi Oli,

find attached the router config + debuf output.
concerning the pool, i am using Cisco ACS 3.2 with
pool configured on it.

Regards,
Elie

--- "Oliver Boehmer (oboehmer)" <oboehmer at cisco.com>
wrote:

> Dib Elie <> wrote on Thursday, June 30, 2005 8:22
> PM:
> 
> > Hi all,
> > 
> > i am implementing a new pppoe infrastructure using
> a
> > 3660 cisco router + CSACS v3.2.
> > 
> > The radius should assign the IP addressing from
> > pre-configured pool on it.
> > 
> > the problem that i am facing is that he is always
> > assigning the same IP to anyone who is accessing
> the
> > router via PPPoE.
> 
> can you please send the Radius profile and/or "debug
> radius
> authentication" to see what your ACS is sending?
> please also include the
> virtual-template config and the pool config..
> 
> 	oli
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: pppoe.TXT
Url: https://puck.nether.net/pipermail/cisco-bba/attachments/20050630/c0c86f34/pppoe-0001.ksh
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: debug.TXT
Url: https://puck.nether.net/pipermail/cisco-bba/attachments/20050630/c0c86f34/debug-0001.ksh