[cisco-bba] PPPoE and many virtual-templates (per subif/vlan)
Tassos Chatzithomaoglou
achatz at forthnet.gr
Tue Mar 8 11:57:01 EST 2005
Thanks Andy ;-)
This seems to be exactly what i was looking for.
Do you know if this bba-group setup will work for ethernet subinterfaces too?
Andy Schutz (aschutz) wrote on 8/3/2005 18:15:
> Try using bba-groups:
> http://www.cisco.com/en/US/partner/products/hw/routers/ps133/products_config
> uration_guide_chapter09186a0080175167.html#wp1050602
>
> Cheers,
>
> Andy
>
>
>>-----Original Message-----
>>From: cisco-bba-bounces at puck.nether.net
>>[mailto:cisco-bba-bounces at puck.nether.net] On Behalf Of
>>Tassos Chatzithomaoglou
>>Sent: Tuesday, March 08, 2005 7:22 AM
>>To: cisco-bba
>>Subject: [cisco-bba] PPPoE and many virtual-templates (per subif/vlan)
>>
>>I'm using the following config in order to accept and
>>terminate PPPoE connections on a 7200 router.
>>The 7200 is connected through ATM/ima with a 6015 dslam.
>>
>>I'm trying to associate PPPoE users to different
>>virtual-templates, based on the atm subif (or maybe
>>vlan in the future) on which they are terminated.
>>
>>!--------------------------------------------------
>>vpdn-group PPPoE-USERS
>> accept-dialin
>> protocol pppoe
>> virtual-template 1
>>!
>>!
>>vc-class atm PPPoE-128
>> protocol pppoe
>> vbr-nrt 128 32
>> encapsulation aal5snap
>>!
>>vc-class atm PPPoE-384
>> protocol pppoe
>> ubr 384
>> encapsulation aal5snap
>>!
>>!
>>interface ATM2/ima1.1 multipoint
>> description ** subif 1**
>> range PPPoE-1 pvc 8/35 8/36
>> class-range PPPoE-384
>> !
>>!
>>interface ATM2/ima1.2 multipoint
>> description ** subif 2**
>> range PPPoE-2 pvc 9/35 9/36
>> class-range PPPoE-128
>>!--------------------------------------------------
>>
>>When using PPPoE, is there a way i can define another
>>virtual-template to be used under the 2nd atm
>>subif?
>>Maybe i have to change the encapsulation from aal5snap to
>>something else, but then will it work with
>>PPPoE?
>>
>>When using pppovlan (PPPoE over vlan) as encapsulation is
>>there a way i can configure different vt
>>per vlan?
>>
>>PS: If i use PPPoA (and aal5mux), i can configure one
>>-different- vt under each vc-class, so this
>>scenario is working fine.
>>
>>
>>_______________________________________________
>>cisco-bba mailing list
>>cisco-bba at puck.nether.net
>>https://puck.nether.net/mailman/listinfo/cisco-bba
>>
>
>
More information about the cisco-bba
mailing list